Vibe L4-1.8L VIN L (2003)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
IDLE AIR CONTROL (IAC) VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the electrical connector (2) to the idle air control (IAC) valve (1).
2. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
3. Disconnect the two coolant hoses (2) to the IAC valve.
4. Remove the fasteners retaining the IAC valve (3).
5. Remove the IAC valve (4) from the throttle body (1).
6. Remove any remaining IAC valve gasket (4).
INSTALLATION PROCEDURE