Vibe L4-1.8L VIN L (2003)
Transmission Position Switch/Sensor: Service and Repair
MU4
Park/Neutral Position Switch
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the battery.
2. Remove the 4 battery tray retaining bolts, then remove the battery tray from the vehicle.
3. Remove the shift cable retaining clip.
4. Disconnect the cable from the bracket.
5. Remove the shift cable retaining nut, then disconnect the cable from the manual lever.
6. Disconnect the PNP switch electrical connector (1) from the PNP switch.