Vibe L4-1.8L VIN L (2003)
1. Install the HO2S 2 (2) into the exhaust pipe.
2. Tighten the HO2S 2.
NOTE: Refer to Component Fastener Tightening Notice in Service Precautions.
Tighten
Tighten the HO2S 2 to 44 N.m (32 lb ft).
3. Install the HO2S 2 wiring pigtail and body plug (1) into the floor pan.
4. Lower the vehicle.
5. Connect the HO2S 2 electrical connector (1).
6. Install the rear floor console.