Vibe L4-1.8L VIN L (2003)
Clutch Switch: Service and Repair
Clutch Start Switch Replacement
Removal Procedure
1. Disconnect the clutch start switch electrical connector.
2. Remove the clutch start switch retaining nut, then the start switch.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the clutch start switch and retaining nut.
^
Tighten the retaining nut to 16 Nm (12 ft. lbs.).
2. Connect the clutch start switch electrical connector.
3. Check the clutch start switch for proper operation.
