Vibe L4-1.8L VIN L (2003)
5. Using a small screwdriver, unlock the lock tab on the cable adjustment assembly (1).
6. Install the park lock cable through the hole of the shift lever plate, then press the retainer into the shift lever plate.
7. Connect the park lock cable to the shift lock lever.
8. Ensure that the ignition switch is in the ACC or RUN position and the manual lever is in the Neutral position.
9. Press the lock tab on the cable adjustment assembly.
10. Check park lock cable for proper operation.
11. Install the front floor console cover.
12. Install the front floor trim plate.
13. Install the instrument panel trim panel.
14. Install the steering column trim covers.
15. Install the bezel.