Vibe L4-1.8L VIN L (2003)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the Lower Instrument Panel.
3. Remove the clevis clip and the pin.
4. Disconnect the Clutch Pedal Position (CPP) switch electrical connector.
5. Disconnect the Cruise Control Release (CCR) switch electrical connector.
6. Remove the 2 pedal assembly bracket retaining nuts and the 1 retaining bolt.
7. Remove the clutch pedal assembly from the vehicle.
Installation Procedure