Vibe L4-1.8L VIN L (2003)
Flywheel: Service and Repair
Engine Flywheel Replacement
^
Tools Required
-
J 36660-A Torque Angle Meter
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the transaxle assembly.
3. If equipped with a manual transmission, remove the clutch and pressure plate.
4. Remove the 8 flywheel retaining bolts.
5. Remove the flywheel from the crankshaft.
6. Clean any grease or dirt from the crankshaft flange outer surface using a suitable solvent.
Installation Procedure
1. Install the flywheel to the crankshaft.
Notice: Refer to Excessive Adhesive on Flywheel Bolts Notice in Service Precautions.
2. Apply GM P/N 12345493 (Canadian P/N 10953488) or the equivalent, to the flywheel retaining bolt threads (1).