Vibe L4-1.8L VIN L (2003)
Fluid - M/T: Service and Repair
MTN
Transmission Fluid Checking Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the transaxle oil level/filler plug (2) from the transaxle.
3. Inspect the transaxle oil level.
Ensure that the oil level is even with the bottom of the transaxle oil level/filler plug hole.
4. If the oil level is low, adjust the oil level accordingly by adding Type gear oil GL-4 or GL-5, SAE 75W-90 or the equivalent.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the transaxle oil level/filler plug into the transaxle after applying GM P/N 12346004 (Canadian P/N 10953480) or the equivalent, in order
to plug the threads.
^
Tighten the transaxle oil level/filler plug to 39 Nm (29 ft. lbs.).
6. Lower the vehicle.