Vibe L4-1.8L VIN L (2003)
2. Route the rear washer hose (9) through the inside of the rear roof panel.
3. Connect the rear washer hose (9) to the rear washer nozzle hose (4).
4. Position the rear washer hose to the right rear quarter panel area and secure with tape.
5. Position the rear washer hose to the right sill area and secure with tape.
6. Install the rear washer hose (9) through the rubber conduit opening (12) in the right side of the instrument panel.
7. Connect the rear washer hose (9) to the rear washer pump.
8. Install the 2 push in retainers (2) to the rear of the headliner (1).
9. Install the rear dome lamp.
10. Install the right rear upper quarter trim panel.
11. Install the right lower center pillar molding.
12. Install the right hinge pillar trim panel.
13. Install the right wheelhouse panel.
