Vibe AWD L4-2.4L (2009)
Keyless Entry Module: Service and Repair
Remote Control Door Lock Receiver Antenna Replacement
Remote Control Door Lock Receiver Antenna Replacement
Removal Procedure
Warning: Refer to Battery Disconnect Warning (See: Starting and Charging/Battery/Service Precautions).
1. Disconnect the negative battery cable.
2. Remove the right upper quarter panel trim. Refer to Quarter Upper Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
3. Disconnect the remote control door lock receiver electrical connector (2).
4. Remove the bolt (3) from the remote control door lock receiver (1).
5. Remove the remote control door lock receiver (1) from the vehicle.
6. Using a flat-bladed tool, remove the mounting bracket (1) from the receiver (2), if necessary.
Installation Procedure
1. Install the remote control door lock receiver (2) to the mounting bracket (1), if removed.