Vibe AWD L4-2.4L (2009)
Installation Procedure
1. Engage the seven retainers and install the left side air inlet grille panel.
2. Install the push-in retainer (1).
3. Engage the twelve retainers and guide and install the right side air inlet grille panel.
4. Install the push-in retainer (1).
5. Install the rear hood seal from the air inlet grille panel, if removed. Refer to Hood Rear Seal Replacement (See: Doors, Hood and
Trunk/Hood/Hood Weatherstrip/Service and Repair).
6. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper Arm/Service and
Repair/Windshield Wiper Arm Replacement).