Vibe AWD L4-2.4L (2009)
11. Install the two retainers (6) which secure the rear of the headlining trim finish panel.
12. Connect the sunroof gear drive electrical connector (3), if equipped.
13. Connect the electrical connectors (4) to the antenna cord sub assembly and install the bolt (5) to the right rear pillar.
14. Install the sunroof glass weather-strip. Refer to Sunroof Glass Panel Weatherstrip Replacement (See: Roof and Associated Components/Sunroof /
Moonroof/Sunroof / Moonroof Weatherstrip/Service and Repair).
15. Connect the roof wire electrical connectors (8) to the instrument panel junction block.
16. Engage the retainers (7) to the left windshield pillar
17. Connect the rear view mirror connector (9), if equipped.
18. Install the quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement (See: Trim Panel/Service and Repair).
19. Install the dome lamp. Refer to Dome Lamp Replacement (Map Lamp With Sunroof) (See: Lighting and Horns/Dome Lamp/Service and
Repair/Dome Lamp Replacement (Map Lamp With Sunroof))Dome Lamp Replacement (Map Lamp Without Sunroof) (See: Lighting and
Horns/Dome Lamp/Service and Repair/Dome Lamp Replacement (Map Lamp Without Sunroof))Dome Lamp Replacement (Center and Rear) (
See: Lighting and Horns/Dome Lamp/Service and Repair/Dome Lamp Replacement (Center and Rear)).
20. Install the sunshades and retainers. Refer to Sunshade Replacement (See: Sun Visor/Service and Repair) and Sunshade Anchor Replacement (
See: Sun Visor/Service and Repair).
