Vibe AWD L4-2.4L (2009)
2. Place match marks on the 4 brake pad retainers (5, 6, 7, 8) in order to identify the correct position and orientation.
3. Remove the 4 brake pad retainers.
4. Remove the 2 slide pins (2, 12).
5. Remove the 2 slide pin boots (3, 10).
Discard the slide pin boots.
6. Wrap tape (2) over a flat blade screwdriver.
7. Remove the bushing (3) from the slide pin.
Discard the bushing.
Inspection Procedure