Vibe AWD L4-2.4L (2009)
*
The slide pins (2, 12)
*
The caliper housing (1)
4. Use unlubricated, compressed air in order to dry the components.
5. Inspect the caliper bracket (4) for corrosion and wear. Replace the bracket if the bracket is damaged. Refer to Front Brake Caliper Bracket
Replacement (See: Front Brake Caliper Bracket Replacement).
6. Inspect the caliper housing for corrosion and wear. Replace the caliper if the caliper housing is damaged. Refer to Front Brake Caliper
Replacement (See: Front Brake Caliper Replacement).
Installation Procedure
1. Lubricate 2 NEW slide pin boots (1, 2) with lithium soap base glycol grease or Silicone Brake Lubricant, or equivalent. Refer to Adhesives,
Fluids, Lubricants, and Sealers (See: Specifications/Fluid Type Specifications).
2. Install the slide pin boots to the caliper bracket.
3. Lubricate the lower slide pin (1) and the slide pin bushing (2) with lithium soap base glycol grease or Silicone Brake Lubricant, or equivalent.
Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Fluid Type Specifications).