Vibe AWD L4-2.4L (2009)
2. Remove the 2 bolts (1, 2).
3. Remove the rear brake caliper bracket.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the rear brake caliper bracket with the 2 bolts (1, 2) and tighten to 58 Nm (43 lb ft).
2. Install the disc brake hardware and the slide pin boots. Refer to Rear Brake Caliper Hardware Replacement (All Wheel Drive and GT) (See: Rear
Brake Caliper Hardware Replacement)Rear Brake Caliper Hardware Replacement (Except All Wheel Drive and GT) (See: Rear Brake Caliper
Hardware Replacement).
