Vibe AWD L4-2.4L (2009)
8. If the brake fluid level is below the MIN mark, the brake pads are not worn, and there are no brake fluid leaks, add Delco Supreme 11(R), GM P/N
12377967 (Canadian P/N 992667), or the equivalent DOT-3 brake fluid from a clean, sealed brake fluid container, to the reservoir (1) up to the
MAX line.
If the brake fluid level is above the MAX line, siphon the brake fluid level down to the MAX line.
9. Install the reservoir cap.
10. Install the left side access panel and engage the 5 claws (1).
11. Install the hood rear seal and engage the clip.
