Vibe AWD L4-2.4L (2009)
3. Locate the HVAC core box (1). Inspect for moisture in that area. If moisture is present, it's possible that a plugged evaporator drain tube may be
the issue.
4. Install the carpet back and reattach the IP side panel.
5. Inspect for a plugged evaporator drain tube. Force compressed air up the drain hose to remove excess water. Drain until a steady flow is achieved
and the blockage is cleared.
6. Test drive the vehicle then inspect the evaporator drain tube to verify if it is operating correctly.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer