Vibe AWD L4-2.4L (2009)
6. Select the Pontiac Vibe Folder. Click Extract.
7. When the file is saved to the Pontiac Vibe Folder, close the WinZip Dialog box.
5. Double click on the CUW icon on the desktop to access the Vibe Programming application.
OR
Click the Start Icon.
6. Select Programs.
7. Select Vibe Programming Application.
8. Select Vibe Programming.
9. The Calibration Update Wizard Screen S701-02 box will appear.
1. Click File Open.
2. An insert disk box will appear. Click Cancel.
10. The Calibration Update Wizard Screen S701-12 box will appear.
1. Select Desktop in the Look in field.
2. Select the Pontiac Vibe folder and click Open.
3. The Look in field will change to Pontiac Vibe.
11. The Calibration Update Wizard Screen S701-06 box will appear (Connect to Vehicle).
1. At select MDI or J-2534 device Tool , select ETAS MDI in the drop down menu.
2. Click Next.
12. The Calibration Update Wizard Screen S701-08 box will appear (Establishing communication with the vehicle). The Device Explorer box will
appear, listing all the available MDIs.
1. In the Device Explorer box, select the MDI that is configured to the PC and is connected to the vehicle.
2. Click Next.
13. The Calibration Update Wizard Screen S701-09 box will appear (Calibration Selection Confirmation).
1. Review all of the information in this box.
2. Click Next.
14. The Calibration Update Wizard Screen S701-47 box will appear (Verify Calibration ID Numbers).
1. Review all of the information in this box.
2. Click on the old calibration under the Target Cal ID column.
3. Click Next.
15. The Calibration Update Wizard Screen S701-14 box will appear (Vehicle Preparation).
1. Review all of the information in this box.
2. Turn OFF the ignition.
3. Click Next.
16. The Calibration Update Wizard Screen S701-15 box will appear (Prepare for Reprogramming).
1. Review all of the information in this box.
2. Turn ON the ignition with the engine OFF.
3. Click Start.
17. The Calibration Update Wizard Screen S701-17 box will appear (Flash Calibration Update in Process).
Wait for the update process to complete.
18. The Calibration Update Wizard Screen S701-22 box will appear (Flash Calibration Update Successful).
1. Review all of the information in this box.
2. Turn OFF the ignition.
3. Click Next.
19. The Calibration Update Wizard Screen S701-23 box will appear (Prepare for verifying vehicle).
1. Review all of the information in this box.
2. Turn ON the ignition with the engine OFF.