Vibe AWD L4-2.4L (2009)
3. Inspect the accelerator pedal operation.
4. Inspect the accelerator pedal assembly operation.
Note
Ensure the most recent Tech 2(R) software download is loaded onto the Tech 2(R) BEFORE performing step 4.1.
1. Connect the Tech 2(R) to the vehicle.
2. From the Main Menu of the Tech 2(R), select Diagnostics>Year>Passenger Car>Division>Model>Powertrain>Transmission
Selection>Engine Selection>ECM>Data Display> TAC Data. The TAC Data screen provides voltage information for the Accel Sensor Out
No. 1 and Accel Sensor Out No. 2.
3. Check the values by referring to the table below.
5. Check for diagnostic trouble codes (DTCs). If DTCs are displayed, verify the code(s) and record the freeze frame data, and then perform repairs as
necessary.
6. Install the driver floor mat.
-
If the vehicle was equipped with a Pontiac Vibe AWFM, install the new floor mat.
-
If the vehicle is equipped with a standard (carpeted) or aftermarket floor mat, reinstall the floor mat. These mats do not require replacement.
7. Test drive the vehicle and inspect it for any problems.
Owner Letter
Owner Letter
July 2010