Vibe AWD L4-2.4L (2009)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).
2. Remove the air cleaner cap with hose.
3. Disconnect the camshaft position sensor connector (1).
4. Remove the bolt (2) and the camshaft position sensor.
Installation Procedure
1. Apply a light coat of engine oil to the O-ring (1) of the sensor.