Vibe AWD L4-2.4L (2009)
16. Install the four ignition coils (1-4) to the cylinder head cover.
17. Position the engine cover (1) to the engine.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
18. Install the 2 engine cover fasteners and tighten to 7 Nm (62 lb in).
19. Install the 2 engine cover plastic retainers.
20. Reconnect the EFI Main Relay (1) to the Fuse/Relay Block 1.
21. Inspect for the following conditions:
*
Normal operation
The pistons, piston rings and valves are operating normally if the cylinder compression pressure increases quickly and evenly to the
compression standard 1,300 kPa (218 psi).
*
Faulty piston rings