Vibe AWD L4-2.4L (2009)
1. Install the side impact sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the side impact sensor fastener (1).
Tighten the fastener to 9 Nm (80 lb in).
3. Install the side impact sensor electrical connector (2).
4. Install the front seat belt retractor. Refer to Seat Belt Retractor Pretensioner Replacement - Left Front (See: Seat Belt Systems/Seat Belt
Tensioner/Service and Repair/Removal and Replacement/Seat Belt Retractor Pretensioner Replacement - Left Front) or Seat Belt Retractor
Pretensioner Replacement - Right Front (See: Seat Belt Systems/Seat Belt Tensioner/Service and Repair/Removal and Replacement/Seat Belt
Retractor Pretensioner Replacement - Right Front).
5. Install the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
6. Install the rear door sill plate. Refer to Door Sill Plate Replacement (Front Sill) (See: Body and Frame/Interior Moulding / Trim/Scuff
Plate/Service and Repair)Door Sill Plate Replacement (Rear Sill) (See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair
).
7. Install the front door sill plate. Refer to Door Sill Plate Replacement (Front Sill) (See: Body and Frame/Interior Moulding / Trim/Scuff
Plate/Service and Repair)Door Sill Plate Replacement (Rear Sill) (See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair
).
8. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag(s) Arming and Disarming/Service and Repair).