Vibe AWD L4-2.4L (2009)
Auxiliary Power Outlet: Service and Repair
12-Volt Accessory Power Receptacle Replacement
12-Volt Accessory Power Receptacle Replacement
Removal Procedure
1. Remove the front floor console. Refer to Front Floor Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair).
2. Remove the no. 2 switch hole base.
3. Disengage the claw and remove the power point socket assembly (1).
4. Disengage the 2 claws and remove the power outlet socket cover (1).
Installation Procedure