Vibe AWD L4-2.4L (2009)
3. Connect the connector (1) to the module.
4. Turn the lock lever (2).
5. Securely push in the lock of the lock lever.
6. Install the wire harness clamp (3) to the module.
7. Install the upper instrument panel. Refer to Instrument Panel Upper Trim Pad Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
8. Initialize the steering angle sensor and calibrate torque sensor zero point. Refer to Steering Angle Sensor Initialization and Steering Shaft Torque
Sensor Zero Point Calibration (Manual) (See: Sensors and Switches - Steering and Suspension/Sensors and Switches - Steering/Steering Angle
Sensor/Testing and Inspection/Steering Angle Sensor Initialization and Steering Shaft Torque Sensor Zero Point Calibration (Manual))Steering
Angle Sensor Initialization and Steering Shaft Torque Sensor Zero Point Calibration (Scan Tool) (See: Sensors and Switches - Steering and
Suspension/Sensors and Switches - Steering/Steering Angle Sensor/Testing and Inspection/Steering Angle Sensor Initialization and Steering Shaft
Torque Sensor Zero Point Calibration (Scan Tool)).