Vibe AWD L4-2.4L (2009)
3. Position the wheel on the tire changing machine with the valve stem and the tire pressure indicator sensor (2) at the 8 o'clock position and the head
(1) at the 12 o'clock position. This will protect the tire pressure sensor.
4. Align the high spot on the tire, marked with paint or an adhesive label, to the low spot on the wheel, which is at the valve stem.
5. Rotate the wheel clockwise and push down on the tire in order to move the bottom bead to the inside of the wheel rim.
6. Position the tire and the wheel with the valve stem (2) at the 4 o'clock position and the head (1) at the 12 o'clock position. This will protect the tire
pressure sensor.
7. Rotate the wheel counterclockwise and push down on the tire in order to move the top bead to the inside of the wheel rim.
Warning
To avoid serious personal injury, do not stand over tire when inflating. The bead may break when the bead snaps over the safety hump. Do not exceed
275 kPa (40 psi) pressure when inflating any tire if beads are not seated. If 275 kPa (40 psi) pressure will not seat the beads, deflate, relubricate the
beads and reinflate. Overinflation may cause the bead to break and cause serious personal injury.
Note: Ensure the valve core is not in the valve stem.
