Vibe AWD L4-2.4L (2009)
8. From the CH-49684 CH-49684 kit, place the CH-49684-2 (2) on a press support plate.
9. Place the inboard side of the knuckle on the CH-49684-2.
10. Place the CH-49684-1 (1) on the outside outer race of the bearing.
11. Use a press in order to remove the bearing from the knuckle.
Press from the outboard side of the bearing toward the inboard side of the knuckle.
Installation Procedure
1. Place the outboard side of the knuckle on a press support plate.
2. Place the wheel bearing (2) on the inboard side of the knuckle.
3. Place the CH-49684-1 (1) on the bearing.
4. Use a press in order to install the bearing into the knuckle.
Press from the inboard side of the bearing toward the outboard side of the knuckle.
