Vibe AWD L4-2.4L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Before installing the transmission control cable assembly, check that the park/neutral position switch and the shift lever are in neutral.
1. Put the transmission control cable into the cabin and connect the transmission control cable with the nuts (1). Tighten the nuts to 5 Nm (44 lb in).
2. Install the transmission control cable support with the nut (1) and tighten to 5 Nm (44 lb in).
