Vibe AWD L4-2.4L (2009)
Valve Body: Service and Repair
MVD 5 Speed - Automatic Transmission
Control Valve Body Replacement
Removal Procedure
1. Disconnect the negative battery cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Remove the engine splash shield. Refer to Engine Splash Shield Replacement - Left Side (See: Body and Frame/Splash Guard/Service and
Repair/Engine Splash Shield Replacement - Left Side).
3. Drain the automatic transaxle fluid.
4. Remove the automatic transaxle oil pan assembly.
5. Disconnect the transmission wire.
6. Disconnect the shift solenoid valve connectors (1-7).
7. Remove the bolt and lock plate, and disconnect the ATF temperature sensor.