Vibe AWD L4-2.4L (2009)
Transmission Position Switch/Sensor: Service and Repair
MVA 4 Speed - Automatic Transmission
Park/Neutral Position Switch Replacement
Removal Procedure
1. Disconnect the negative battery cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Remove the battery. Refer to Battery Replacement (See: Starting and Charging/Battery/Service and Repair).
3. Remove the battery tray. Refer to Battery Tray Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair).
4. Remove the nut (1) and disconnect the control cable assembly from the control shaft lever.
5. Remove the clip and disconnect the transmission control cable assembly from the control cable bracket.
6. Disconnect the park/neutral position switch connector.