Vibe AWD L4-2.4L (2009)
Windshield Washer Hose: Service and Repair
Hose Replacement (Hose Connector to Washer Nozzle)
Removal Procedure
1. Remove the hood insulator. Refer to Hood Insulator Replacement (See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Insulator /
Pad/Service and Repair).
2. Disconnect the washer hose (2) from the following components:
*
The washer nozzle (3)
*
The hose connector (1)
*
The washer hose to hood retainers
3. Position the hose connector higher than washer solvent container, if necessary in order to prevent the washer fluid from being lost.
4. Remove the washer hose (2) from the hood.
Installation Procedure