Vibe FWD L4-1.8L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the DRL control module (1) with the mounting bracket attached to the instrument panel. Secure the bracket with the screw (3) and tighten to
8.0 Nm (71 lb in).
2. Connect the DRL control module electrical connector (2).
3. Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement (See: Body and Frame/Interior Moulding /
Trim/Glove Compartment/Service and Repair).
