Vibe FWD L4-1.8L (2010)
![background image](/pontiac/vibe_fwd/l4-1.8l/Page-107002.png)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution)
1. Install the engine coolant temperature sensor (1) through a new gasket and tighten to 20Nm (14 lb ft).
2. Connect the engine coolant temperature sensor connector (1).
3. Add engine coolant. Refer to Cooling System Draining and Filling (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
4. Inspect for a coolant leak.
5. Install the air cleaner cap sub-assembly with hose.
6. Install the engine cover. Refer to Engine Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover Replacement).