Vibe FWD L4-1.8L VIN 8 (2004)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Front Door
Weatherstrip Replacement - Front Door
Removal Procedure
1. Open the door.
2. Remove the bolt (3) that retains the front door check link (2) to the door jamb.
3. Remove the following components from the door (3):
*
The front door weatherstrip (2)
*
The plastic retainers (1)
Installation Procedure
1. Install the front door weatherstrip (2) to the door (3). Ensure that the plastic retainers (1) are completely engaged.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolt (3) that retains the front door check link (2) to the door jamb.
Tighten the bolt to 5.5 N.m (49 lb in).
3. Close the door.