Vibe FWD L4-1.8L VIN 8 (2004)
5. Install the hood primary latch release cable handle (1) to the lower instrument panel (2).
6. Guide the cable (2) into position and remove the mechanic's wire (1).
7. Install the hood primary latch release cable (1) to the hood secondary catch and primary latch (2).
8. Install the hood secondary catch and primary latch. Refer to Hood Latch Replacement (See: Hood Latch/Service and Repair/Hood Latch
Replacement) .
9. Install the two left wheel house panel inner fasteners.
10. Lower the hood.