Vibe FWD L4-1.8L VIN 8 (2004)
![background image](/pontiac/vibe_fwd/l4-1.8l_vin_8/Page-1848001.png)
Hood Weatherstrip: Service and Repair
Seal Replacement - Hood Rear
Removal Procedure
1. Raise and suitably support the hood.
2. Remove the following components from the vehicle:
*
The rear hood seal (1).
*
The 7 plastic retainers.
Installation Procedure
1. Install the 7 rear hood seal plastic retainers to the seal (1).
2. Install the rear hood seal (1) to the air inlet grille panels.
3. Lower the hood.