Vibe FWD L4-1.8L VIN 8 (2004)
7. Install the sunroof housing (2) to the vehicle. Secure the housing with the 6 nuts.
8. Install the 4 brackets (1) which secure the housing. Secure the brackets with the 8 bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the sunroof housing nuts and bolts to 20 N.m (15 lb ft).
9. Install the dome lamp wiring harness to the 2 hangers on the sunroof housing.
10. Install the 2 side rail roof panel insulators (1) to roof panel. Secure each of the insulators with 2 plastic retainers (2).
11. Install the 4 sunroof housing drain hoses to the sunroof housing (1). Secure each drain hose (2) with the hose clamp.