Vibe FWD L4-1.8L VIN 8 (2004)
Parking Brake Warning Lamp: Service and Repair
Park Brake Warning Lamp Switch Replacement
Removal Procedure
1. Remove the rear floor console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages, and Console.
2. Disconnect the park brake switch electrical connector (10).
3. Remove the screw (12) from the park brake switch (5).
4. Remove the park brake switch.
Installation Procedure
1. Install the park brake switch (5) to the park brake lever.
2. Install the screw (12) to the park brake switch.
3. Connect the park brake switch electrical connector (10).
4. Inspect the park brake lever travel. Adjust the park brake lever travel if necessary. Refer to Park Brake Adjustment (Drum Brakes) or Park Brake
Adjustment (Disc Brakes).
5. Install the rear floor console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages, and Console.