Vibe FWD L4-1.8L VIN 8 (2004)
Cruise Control Switch: Service and Repair
CRUISE CONTROL SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the inflatable restraint steering wheel module.
2. Disconnect the cruise control connector from the harness.
3. Disconnect the cruise control wire from the steering wheel.
4. Remove the 2 screws and the cruise control lever.
INSTALLATION PROCEDURE
1. Install the cruise control lever and the 2 screws.
2. Connect the cruise control wire to the steering wheel.
3. Connect the cruise control connector.
4. Install the inflatable restraint steering wheel module
