Vibe FWD L4-1.8L VIN 8 (2004)
5. Remove the fastener retaining the CMP actuator solenoid valve (1) to the cylinder head.
6. Remove the CMP actuator solenoid valve (1) and the O-ring (2) from the cylinder head.
INSTALLATION PROCEDURE
1. Install a new O-ring (2) and the CMP actuator solenoid valve (1) into the cylinder head.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Secure the CMP actuator solenoid valve with the fastener.
Tighten
Tighten the fastener to 9 N.m (80 lb in).