Vibe FWD L4-1.8L VIN 8 (2004)
1. Install the exhaust camshaft onto the cylinder head with the number 1 cam lobes facing as shown.
Important: Each bearing cap has a number and a directional arrow marked on the bearing cap.
2. Install the camshaft bearing caps in their proper locations and direction.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the camshaft bearing cap bolts.
^
Tighten the camshaft bearing cap bolts in the sequence shown to 13 Nm (10 ft. lbs.).
^
Tighten the front bearing cap bolts to 23 Nm (17 ft. lbs.).
4. Install the exhaust camshaft sprocket to the camshaft.