Vibe FWD L4-1.8L VIN 8 (2004)
13. Install the timing chain tensioner. Secure the timing chain tensioner using 2 bolts (1).
^
Tighten the timing chain tensioner bolts to 10 Nm (89 inch lbs.).
14. Install the right side engine mounting bracket. Secure the bracket using 3 bolts.
^
Tighten the engine mounting bracket bolts to 54 Nm (40 ft. lbs.).
15. Install the drive belt tensioner. Secure the tensioner using 1 bolt and one nut.
^
Tighten the bolt to 69 Nm (51 ft. lbs.).
^
Tighten the nut to 29 Nm (21 ft. lbs.).
16. Raise the vehicle. Support the vehicle. Refer to Vehicle Lifting.
17. Install the crankshaft position sensor. Secure the sensor using 1 bolt (5).
^
Tighten the crankshaft position sensor bolt to 12 Nm (106 inch lbs.).
18. Install the crankshaft pulley. Secure the crankshaft pulley using 1 bolt.
^
Tighten the crankshaft pulley to 142 Nm (105 ft. lbs.).
19. Install the power steering pump.