Vibe FWD L4-1.8L VIN 8 (2004)
2. Install the front pipe to the front pipe hanger (2).
3. Install the following components to the front pipe to the Three Way Catalytic Converter (TWC) exhaust pipe:
^
The 2 springs
^
The 2 bolts
^
Tighten the front pipe-to-Three Way Catalytic Converter (TWC) exhaust pipe bolts to 43 Nm (32 ft. lbs.).
4. Install the following components to the exhaust manifold:
^
The 2 springs
^
The 2 bolts
^
Tighten the front pipe-to-exhaust manifold bolts to 43 Nm (32 ft. lbs.).
5. Install the floor panel brace.
^
Tighten the front pipe floor brace nuts to 30 Nm (22 ft. lbs.).
6. Install the oxygen sensors.
7. Lower the vehicle.
