Vibe FWD L4-1.8L VIN 8 (2004)
1. Install the two PCM brackets (3) to the PCM (2).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Secure the two brackets to the PCM with the four fasteners.
Tighten
Tighten the PCM bracket fasteners to 3.2 N.m (28 lb in).
3. Connect the four PCM electrical connectors (1).
4. Swing the PCM (2) with bracket (3) up in position under the IP.
5. Secure the PCM to the IP with the two fasteners.
Tighten
Tighten the two fasteners to 9 N.m (80 lb in).