Vibe FWD L4-1.8L VIN 8 (2004)
![background image](/pontiac/vibe_fwd/l4-1.8l_vin_8/Page-773001.png)
Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the 2 fasteners.
2. Remove the 2 plastic retainers.
3. Remove the engine cover (1) from the engine.
4. Disconnect the CMP electrical connector (3).
5. Remove the 1 CMP sensor hold-down bolt (2).
6. Remove the CMP sensor (1) from the cylinder head.
INSTALLATION PROCEDURE