Vibe FWD L4-1.8L VIN 8 (2004)
5. Connect the quick-connect fitting of the fuel feed hose (1) to the fuel feed pipe (2) of the fuel rail.
6. Install the cover for the quick connect coupling of the fuel teed hose.
NOTE: Refer to Fastener Notice in Service Precautions.
7. Connect the negative battery cable.
Tighten
Tighten the retainer for the negative battery cable terminal to 15 N.m (11 lb ft).
8. Turn ON the ignition in order to pressurize the fuel system.
9. Turn OFF the ignition.
10. Check for any fuel leaks.
11. Install the engine cover (1).
12. Secure the engine cover (1) with the 2 fasteners.
Tighten
Tighten the two fasteners to 7 N.m (62 lb in).
13. Install the 2 plastic retainers.