Vibe FWD L4-1.8L VIN 8 (2004)
19. Disconnect the SIR deployment harness from the power source after the air bag deploys.
20. Seat one banana plug into the other in order to short the deployment harness leads.
21. If the air bag did not deploy, disconnect the adapter and discontinue the procedure. Contact the Technical Assistance Group. Otherwise, proceed to
the following steps.
CAUTION: Refer to SIR Deployed Inflator Modules Are Hot Caution in Service Precautions.
22. Put on a pair of shop gloves.
23. Disconnect the pigtail adapter from the inflator module as soon as possible.
24. Inspect the pigtail adapter and the SIR deployment harness. Replace as needed.
25. Dispose of the deployed module through normal refuse channels.
26. Wash hands with a mild soap.
Inflatable Restraint I/P Module
DEPLOYMENT OUTSIDE VEHICLE - INFLATABLE RESTRAINT I/P MODULE
TOOLS REQUIRED
-
J 39401-B SIR Deployment Fixture
-
J 38826 SIR Deployment Harness
-
An appropriate pigtail adaptor
CAUTION:
-
Refer to SIR Inflator Module Disposal Caution in Service Precautions.
-
Refer to SIR Inflatable Module Deployment Outside Vehicle Caution in Service Precautions.
Deploy the inflatable restraint IP module outside of the vehicle when the vehicle will be returned to service. Situations that require deployment outside