Vibe FWD L4-1.8L VIN 8 (2004)
Child Seat Tether Attachment: Service and Repair
CHILD RESTRAINT TETHER ANCHOR REPLACEMENT (UPPER)
REMOVAL PROCEDURE
1. Remove the rear access panel (2).
2. Remove the following components from the vehicle:
-
The bolt (3)
-
The child seat anchor bracket (4)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the child seat anchor bracket (4) to the vehicle. Secure the bracket with the bolt (3).
Tighten
Tighten the child seat anchor bracket bolt to 20 N.m (15 lb ft).
2. Install the rear access panel (2).