Vibe FWD L4-1.8L VIN 8 (2004)
Power Door Lock Switch: Service and Repair
POWER DOOR LOCK SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. The driver side power door lock switch is part of the power accessory switch panel, to replace. Refer to Power Accessory Switch Panel
Replacement.
2. If removing the passenger side power lock switch,use a taped flat bladed tool, gently pry the front side door accessory switch mounting plate (2)
from the front side door trim (1).
3. Disconnect the front side door lock switch electrical connector (3).
4. Remove the front side door lock switch (1) from the mounting plate (3) by releasing the tabs (5).
INSTALLATION PROCEDURE