Vibe FWD L4-1.8L VIN 8 (2004)
![background image](/pontiac/vibe_fwd/l4-1.8l_vin_8/Page-1287002.png)
3. Install the battery positive fuse block feed cable to positive (+) battery cable. Secure with the nut (5).
Tighten
Tighten the positive (+) battery cable-to-relay block 1 feed cable retaining nut to 9 N.m (78 lb in).
4. Tape the loom to prevent dirt and moisture from entering the harness.
5. Install the positive (+) battery cable harness loom to the harness retainers.
6. Install the plastic insulator to the positive (+) battery cable.
7. Install the battery to the vehicle.