Vibe FWD L4-1.8L VIN 8 (2004)
10. Loosen the 17 valve body retaining bolts.
11. Disconnect the manual valve connecting rod from the manual lever, then remove the 17 bolts and valve body and manual valve as an assembly.
12. Remove the solenoid bolt (2), then remove the 2 - 3 shift solenoid (1) from the valve body.
13. Remove the 1 - 2 shift solenoid (3) from the valve body.
14. Remove the Torque Converter Clutch solenoid bolt (4), then remove the TCC solenoid (5).
15. Remove the Pressure Control Solenoid retaining bolt and bracket (7), then remove the Pressure Control Solenoid (8) from the valve body.
Installation Procedure
1. Coat 3 new O-rings with AC Delco T-IV automatic Transmission fluid.
2. Install the new O-rings on the solenoids.
3. Notice: Refer to Fastener Notice in Service Precautions.
